遼寧恒潤石油化工有限公司是中國的工業化學品進口服務商，致力于為客戶提供高效便捷的服務，我司與國外70多家品牌生產商代理商建立長期的戰略合作伙伴關系，能夠快速幫助客戶解決實際問題保證、并且長期穩定為客戶儲備庫存，節約客戶等貨時間。涉及行業油：汽車行業、礦山行業、風電行業、紡織行業、石油開采、軌道交通、食品醫療、電子行業、船舶制造與維護保養、航空航天、電機軸承、潤滑系統、儀器行業。公司代理經銷品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克魯伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘東興PENTOSIN、阿維亞AVIA、安潤龍ANDEROL、亞拉ARAL、雪弗龍Chevron、赤士頓CHESTERTON LE、勞勃抗LUBCON、好富頓HOUGHTON、嘉實多Castrol、魔力大MOLYDAL、羅哥ROCOL、凱密特爾Chemetall、等品牌潤滑油、潤滑脂、防銹油、磨削液、切削液、鋰基脂等。
公司：

Klüber Staburags NBU 30 PTM

KlüberStaburagsNBU 30 PTM是一種非常粘合的組裝潤滑脂。

KlüberStaburagsNBU 30 PTM是一種潤滑和組裝潤滑脂。

適用于您的應用程序

- 裝配潤滑脂，防止摩擦腐蝕

- 良好的防腐蝕性

- 即使在室外條件下也具有耐水性

- 由Knorr Bremse公司批準，N 12006-37

描述

STABURAGS NBU 30 PTM是一種含有固體潤滑劑的組裝潤滑脂。它具有耐水性和防止摩擦腐蝕（微動腐蝕）。它已經證明在高濕度的戶外應用中是。

應用

STABURAGS NBU 30 PTM適用于裝配滑動間隙配合的應用的裝配潤滑脂。應用包括冷熱水閥門和水，滑道（特別是在灌裝機中），閥門主軸和氣缸導軌。該產品也可用作密封油脂。此外，它適用于滑道，螺栓，主軸和螺釘的潤滑，例如，在鐵路轉向架組件。 STABURAGS NBU 30 PTM特別適用于軌道車輛的外部制動部件，例如螺栓和桿。 STABURAGS NBU 30 PTM便于裝配和拆卸車輛中的ABS傳感器。

應用筆記

使用氣溶膠噴涂版本的STABURAGS NBU 30 PTM進行鐵路制動器部件的再潤滑，其中沒有加入油嘴。為了地滲透到精細間隙中，我們建議噴涂至少8秒鐘。這將提高軌道車輛中制動桿的效率，從而確保長的維護間隔。當用于裝配和潤滑目的時，我們建議通過無絨布，手工或刷子將潤滑劑輕輕涂抹在部件表面上。 STABURAGS NBU 30 PTM在低溫至低溫度下顯示出良好的粘合強度。 -40°C。

Klüber Staburags NBU 30 PTM Is a very adhesive assembly grease.

Klüber Staburags NBU 30 PTM is a Lubricating and assembly grease.

Benefits for your application

– Assembly grease protecting against tribo-corrosion

– Good corrosion protection

– Excellent resistance to water even under outdoor conditions

– Approved by the company Knorr Bremse, N 12006-37

Description

STABURAGS NBU 30 PTM is an assembly grease containing a solid lubricant. It is resistant to water and protects against tribocorrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity.

Application

STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, in railway bogie assemblies. STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods. STABURAGS NBU 30 PTM facilitates assembly and disassembly of ABS sensors in vehicles.

Application notes

Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals. When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush. STABURAGS NBU 30 PTM shows good adhesive strength at low temperatures down to min. -40 °C.