遼寧恒潤石油化工有限公司是中國的工業化學品進口服務商，致力于為客戶提供高效便捷的服務，我司與國外70多家品牌生產商代理商建立長期的戰略合作伙伴關系，能夠快速幫助客戶解決實際問題保證、并且長期穩定為客戶儲備庫存，節約客戶等貨時間。涉及行業油：汽車行業、礦山行業、風電行業、紡織行業、石油開采、軌道交通、食品醫療、電子行業、船舶制造與維護保養、航空航天、電機軸承、潤滑系統、儀器行業。公司代理經銷品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克魯伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘東興PENTOSIN、阿維亞AVIA、安潤龍ANDEROL、亞拉ARAL、雪弗龍Chevron、赤士頓CHESTERTON LE、勞勃抗LUBCON、好富頓HOUGHTON、嘉實多Castrol、魔力大MOLYDAL、羅哥ROCOL、凱密特爾Chemetall、等品牌潤滑油、潤滑脂、防銹油、磨削液、切削液、鋰基脂等。
公司：

Klüber Centoplex 2

KlüberCentoplex2是一種用于滾動軸承和滑動軸承的多用途潤滑脂。

適用于您的應用程序

- 簡單應用的長期潤滑

- 多用途潤滑脂

描述

CENTOPLEX 2和3是基于抗氧化礦物油和鋰皂的多用途潤滑脂。它們符合DIN 51825 K的滾動軸承潤滑脂要求。由于具有良好的耐正常和長期潤滑性。 NLGI 3級粘度更大的CENTOPLEX用于帶有傾斜或垂直軸或軸承密封不充分的軸承。

應用

CENTOPLEX 2和CENTOPLEX 3用于滾動軸承和滑動軸承。當用于長期潤滑時，摩擦點的溫度應<70°C。潤滑脂不斷地進給到摩擦點。我們很樂意提供有關再潤滑間隔和數量的更詳細信息。

因此，CENTOPLEX 2和3適用于齒形和蝸輪，導軌和螺紋主軸的潤滑。

CENTOPLEX 2和3，標準潤滑脂基于礦物油和鋰皂。根據DIN 51825標準。

應用筆記

CENTOPLEX 2和3可以用油，刷子或刮刀涂抹。如果可以使用全自動潤滑系統進行再潤滑，則應使用CENTOPLEX 2。對于初始潤滑，可根據軸承密封使用CENTOPLEX 2或CENTOPLEX 3。

Klüber Centoplex 2 is a Multi-purpose grease for rolling and plain bearings.

Benefits for your application

– Long-term lubrication of simple applications

– Multi-purpose greases

Description

CENTOPLEX 2 and 3 are multi-purpose greases based on oxidation-resistant mineral oils and lithium soap. They meet the rolling bearing grease requirements according to DIN 51825 to the good resistance to working under normal temperatures and loads these greases can be used for long term lubrication. The more viscous CENTOPLEX of NLGI grade 3 is to be used for bearings with inclined or vertical shafts or insufficiently sealed bearings.

Application

CENTOPLEX 2 and CENTOPLEX 3 are used for rolling and plain bearings. When used for long-term lubrication,temperatures at the friction point should be <70 °c. the greases can be used up to their maximum service temperature of 130 °c provided fresh grease is constantly fed to the friction point. we would be pleased to provide more detailed information on relubrication intervals and quantities.

CENTOPLEX 2 and 3 are also suitable for the lubrication of toothed and worm gears, guides and threaded spindles.

CENTOPLEX 2 and 3 can be used for all applications where standard greases based on mineral oil and lithium soap acc. to DIN 51825 are used.

Application notes

CENTOPLEX 2 and 3 can be applied by grease gun, brush or spatula. If a fully-automatic lubrication system is available for relubrication, CENTOPLEX 2 should be used. For initial lubrication CENTOPLEX 2 or CENTOPLEX 3 can be used depending on the bearing seal.