遼寧恒潤石油化工有限公司是中國的工業化學品進口服務商，致力于為客戶提供高效便捷的服務，我司與國外70多家品牌生產商代理商建立長期的戰略合作伙伴關系，能夠快速幫助客戶解決實際問題保證、并且長期穩定為客戶儲備庫存，節約客戶等貨時間。涉及行業油：汽車行業、礦山行業、風電行業、紡織行業、石油開采、軌道交通、食品醫療、電子行業、船舶制造與維護保養、航空航天、電機軸承、潤滑系統、儀器行業。公司代理經銷品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克魯伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘東興PENTOSIN、阿維亞AVIA、安潤龍ANDEROL、亞拉ARAL、雪弗龍Chevron、赤士頓CHESTERTON LE、勞勃抗LUBCON、好富頓HOUGHTON、嘉實多Castrol、魔力大MOLYDAL、羅哥ROCOL、凱密特爾Chemetall、等品牌潤滑油、潤滑脂、防銹油、磨削液、切削液、鋰基脂等。
公司：

KlüberStructovisCHD

KlüberStructovisCHD是一種礦物油基特殊潤滑劑。

適用于您的應用程序

- 良好的磨損保護

- 良好的防腐蝕性

- 膠粘劑

- 噪音阻尼（取決于粘度）

- 緊急潤滑性能（BHD MF）

描述

STRUCTOVIS HD是一種基于礦物油的特殊潤滑劑系列，有不同的粘度等級。 STRUCTOVIS類型AHD至EHD，BHD MF和BHD 75 S含有粘合改進劑，BHD MF型固體潤滑劑MoS2用于改善緊急潤滑性能。 STRUCTOVIS BHD 75 S含有易燃溶劑。所有STRUCTOVIS HD類型均提供良好的和防腐蝕保護。 STRUCTOVIS類型的粘合性不正確，因此存在因漏油而導致污染的風險，特別是在高鏈速時。高粘度（AHD至CHD）的STRUCTOVIS類型也可降低鏈的噪音。

注意：

STRUCTOVIS BHD Spray和STRUCTOVIS BHD 75 S的產品數據是指無溶劑活性劑。

應用

STRUCTOVIS HD潤滑劑用于驅動，控制和輸送鏈。 STRUCTOVIS BHD和BHD 75 S已證明對鏈條制造商對鋼鏈條的初始潤滑特別有效。

應用筆記

根據粘度，STRUCTOVIS HD可通過滴灌或自動潤滑系統，供油器或刷子施加。使用自動系統時，請參閱制造商規定的粘度。如果制造商STRUCTOVIS BHD，我們建議浸浴溫度在80到90°C之間。因此，低粘度HD類型（40°C時460mm2/ s）和BHD 75 S可用于冷浴過程。鏈條應保留在浴槽中，直到表面不再有氣泡上升。

Klüber Structovis CHD Is a mineral oil-based special lubricant.

Benefits for your application

– Good wear protection

– Good corrosion protection

– Adhesive

– Noise dampening (depending on viscosity)

– Emergency lubricating properties (BHD MF)

Description

STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades. The STRUCTOVIS types AHD to EHD, BHD MF and BHD 75 S contain special adhesion improvers, the type BHD MF the solid lubricant MoS2 for improved emergency lubricating properties. STRUCTOVIS BHD 75 S contains a flammable solvent. All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.

Note:

The product data of STRUCTOVIS BHD Spray and STRUCTOVIS BHD 75 S refer to the solvent-free active agent.

Application

STRUCTOVIS HD lubricants are used for driving, control and conveyor chains. STRUCTOVIS BHD and BHD 75 S have proven particularly effective for the initial lubrication of steel link chains by the chain manufacturer.

Application notes

Depending on the viscosity STRUCTOVIS HD can be applied by drip-feed or automatic lubrication systems, oil feeders or brush. When using automatic systems please observe the maximum viscosity specified by the manufacturer. If STRUCTOVIS BHD is applied by the chain manufacturer we recommend an immersion bath temperature between 80 and 90 °C. The low-viscosity HD types (up to 460 mm2/s at 40 °C) and BHD 75 S (please also observe safety data sheet) can also be applied in a cold-bath process. The chain should remain in the bath until no more air bubbles rise to the surface.