遼寧恒潤石油化工有限公司是中國的工業化學品進口服務商，致力于為客戶提供高效便捷的服務，我司與國外70多家品牌生產商代理商建立長期的戰略合作伙伴關系，能夠快速幫助客戶解決實際問題保證、并且長期穩定為客戶儲備庫存，節約客戶等貨時間。涉及行業油：汽車行業、礦山行業、風電行業、紡織行業、石油開采、軌道交通、食品醫療、電子行業、船舶制造與維護保養、航空航天、電機軸承、潤滑系統、儀器行業。公司代理經銷品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克魯伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘東興PENTOSIN、阿維亞AVIA、安潤龍ANDEROL、亞拉ARAL、雪弗龍Chevron、赤士頓CHESTERTON LE、勞勃抗LUBCON、好富頓HOUGHTON、嘉實多Castrol、魔力大MOLYDAL、羅哥ROCOL、凱密特爾Chemetall、等品牌潤滑油、潤滑脂、防銹油、磨削液、切削液、鋰基脂等。
公司：

Klüber Wolfrakote Top Paste

克魯勃WOLFRAKOTE頂貼

克魯勃WOLFRAKOTE頂貼是一個灰色的高溫漿料

適用于您的應用程序

- 在高可靠的干式潤滑于溫度

- 防止發作的螺栓和鉸鏈

- 嘗試和測試有色金屬的鑄造期間長期澆包敷料

描述

WOLFRAKOTE TOP PASTE是基于的烴油和temperatureresistant固體潤滑劑的灰度高溫漿料。在“正常溫度" WOLFRAKOTE TOP PASTE是一個高效的高壓潤滑和組件粘貼表示對金屬高的粘合強度。在高溫下地包含在WOLFRAKOTE TOP膏中的固體潤滑劑保留在摩擦接觸面積，并且由于抓住或材料轉移抵消粘著磨損。

應用

WOLFRAKOTE TOP PASTE已被證明鏈在高溫下初始潤滑。因此，它可以被用于暴露在溫度螺釘，螺栓和鉸鏈的潤滑。在有色金屬的鑄造WOLFRAKOTE TOP PASTE用作熱活化敷料澆注鐵水包，該模具澆口和澆道。

WOLFRAKOTE TOP PASTE因此適合作為分離和裝配糊為套，噴射器，滑動芯和作為在熱室壓鑄機的電加熱筒分離糊。

應用筆記

WOLFRAKOTE TOP PASTE可粘接在的預清洗過的表面的不含油脂，殘基或分離由防腐蝕劑形成的層。清潔后，均勻地分布在整個表面關閉容器應用WOLFRAKOTE TOP PASTE的薄層使用后立即避免糊的污染

Klüber Wolfrakote Top Paste Is a grey high-temperature paste

Benefits for your application

– Reliable dry lubrication at high to extreme temperatures

– Prevents seizure of bolts and hinges

– Tried-and-tested long-term ladle dressing during casting of nonferrous metals

Description WOLFRAKOTE TOP PASTE is a grey high-temperature paste based on high-quality hydrocarbon oils and temperatureresistant solid lubricants. At “normal temperatures" WOLFRAKOTE TOP PASTE is an efficient high-pressure lubricating and assembly paste showing high adhesive strength on metals. At permanently high temperatures the solid lubricants contained in WOLFRAKOTE TOP PASTE remain in the friction contact area and counteract adhesive wear due to seizing or material transfer.

Application

WOLFRAKOTE TOP PASTE has proven effective for the initial lubrication of chains at high temperatures. It can also be used for the lubrication of screws, bolts and hinges exposed to extreme temperatures. In casting of nonferrous metals WOLFRAKOTE TOP PASTE is used as a heat-activated dressing for pouring ladles, dies, mould gates and runners.

WOLFRAKOTE TOP PASTE is also suitable as a separating and assembly paste for die sets, ejectors, sliding cores and as a separating paste for electric heating cartridges in hot chamber casting machines.

Application notes

WOLFRAKOTE TOP PASTE adheres best in pre-cleaned surfaces which are free of grease, residues or separating layers formed by anticorrosion agents. After cleaning, apply a thin layer of WOLFRAKOTE TOP PASTE evenly across the entire surface Close container immediately after use to avoid contamination of the paste