WIKA PGT01 帶電信號輸出波登管壓力表 ninliGAUGE 外掛輸出
Mechatronic
pressure measurement
Bourdon tube pressure gauge with electrical output signal
Standard version, plug outlet
Model PGT01

Bourdon tube pressure gauge model PGT01
多功能inliGAUGE 是幾乎所有壓力測量儀表應用中可靠的解決方案之一。它無需外部電源就能將機械式壓力表的模擬示值與壓力變送器的電信號輸出組合在一起。此類組合儀表可使用所有電信號。該傳感器以無接觸的方式運轉,對測量信號不產生任何影響。許多儀表可根據ATEX EX II 2 G ia的規定交付使用。
Applications
For monitoring of water pressure changes in heating plants (wall-type boilers, free-standing boilers)
Special features
Non-contact sensor (wear-free)
Nominal size 40
Scale ranges 0 ... 2.5 bar to 0 ... 10 bar
Output signal 0.5 ... 4.5 V ratiometric
Description
Design
EN 837-1
Nominal size in mm
40
Accuracy class
2.5
Scale ranges
0 ... 2.5 to 0 ... 10 bar
Pressure limitation
Steady: 3/4 x full scale value
Fluctuating: 2/3 x full scale value
Short time: Full scale value
Permissible temperature
Ambient: -20 … +60 °C
Medium: +60 °C maximum
Temperature effect
When the temperature of the measuring system deviates from the reference temperature (+20 °C): max. ±0.4 %/10 K of the span
Process connection
Plastic (PA),
lower mount (LM) or centre back mount (CBM)
G 1/8 B (male), 14 mm flats
Pressure element
Cu-alloy, C-type
Movement
Cu-alloy
Dial
Plastic, white, black lettering
Pointer
Plastic, black
Case
Plastic, black (PA)
Window
Plastic (PA)
Ingress protection
IP 40 per EN 60529 / lEC 529
Electronics
Output signal (275° indication angle)
0.5 … 2.5 V ratiometric
0.5 … 3.5 V ratiometric
0.5 … 4.5 V ratiometric
Supply voltage (Us)
DC 5 V
Electrical connections / Ingress protection
3-pin connector, tyco AMP Duoplug / IP 40
Reverse polarity safety ensured mechanically
Load
> 5 kΩ
Electromagnetic compatibility
Per test standards EN 61000-4-6 / EN 61000-4-3

Standard version
Dimensions in mm



Ordering information
Model / Nominal size / Scale range / Connection size / Connection location / Output signal / Options
咨詢訂購WIKA PGT01 帶電信號輸出波登管壓力表 ninliGAUGE 外掛輸出













所有評論僅代表網友意見,與本站立場無關。