The given measuring ranges are also available in kg/cm2.
    Other measuring ranges on request

    Vacuum tightness
    Yes

   Output signals

   Voltage supply

    The permissible power supply depends on the corresponding value of the output signal.

    Reference conditions （per IEC 61298-1）

   Temperature
      15 ... 25 °C

    Atmospheric pressure
      860 ... 1,060 mbar

   Humidity
      45 ... 75 % relative

   Power supply
      DC 24 V
      DC 5 V with ratiometric output signal

   Mounting position
      Calibrated in vertical mounting position with pressure connection facing downwards.

   Accuracy

   Accuracy at reference conditions
      ≤ 2 % of span

    Including non-linearity, hysteresis, zero offset and end value deviation （corresponds to measured error per IEC 61298-2）.

   Temperature error at -25 ... +85 °C
      Mean temperature coefficient of zero point
        typical: ≤ ±0.5 % of span/10 K

      Mean temperature coefficient of span
        ≤ 0.3 % of span/10 K

    Settling time
      ≤ 5 ms

   Long-term drift （per IEC 61298-2）
      ≤ 0.3 % of span/year

   Operating conditions

   Ingress protection （per IEC 60529）
      The ingress protection depends on the type of electrical connection.

    The stated ingress protection only applies when plugged in using mating connectors that have the appropriate ingress protection.

    Temperatures

    Resistance

    The pressure transmitter is resistant to the refrigerants R12,R22, R134a, R404a, R407c, R410a, R502, R507.

    Resistance to further refrigerants on request

    Process connections

    Electrical connections

   Short-circuit resistance
      S+ vs. 0V

    Reverse polarity protection
      UB vs. 0V

    Overvoltage protection
      max. DC 36 V

    Insulation voltage
      DC 500 V

    Connection diagrams

    Materials

    Wetted parts
      Process connection from brass
      Sensor from ceramic Al2O3 96 %
      O-ring from CR70 （chloroprene）

   Non-wetted parts
      Case from brass
      Electrical connection from highly resistant, glass-fibre reinforced plastic PBT GF 30

    Approvals, directives and certificates

   Approval （option）
      cRUus （recognition）

   CE conformity
      EMC directive 2004/108/EC, EN 61326 emission （group 1,class B） and immunity （industrial application）

    Dimensions in mm
    Pressure transmitters

    Process connections

Ordering information
Model / Measuring range / Output signal / Electrical connection / Process connection