With very sturdy ? 20mm stem.
Ultra-high precision achievable with exclusive gauge stand (PDS-2)
| Specifications | |||||
| Model | D-50 | D-50S | D-100 | D-100S | |
| Range | 50mm | 100mm | |||
| Resolution | 0.01mm | 0.001mm | 0.01mm | 0.001mm | |
| Accuracy (excluding quantized error) | 0.01mm | 0.004mm | 0.01mm | 0.005mm | |
| Measuring force | Less than 3.0N | Less than 3.5N | |||
| Cable length | 2m | ||||
| Mounting method | ? 20mm stem or fastening by M4 screws at two positions | ||||
| Contact point | M2.5 × 0.45 S? 2.4mm steel | ||||
| Operating temperature | 0 - 40oC | ||||
| Weight | 450g | 520g | |||
| Output signal | 90o phase difference, 20μm pitch (R03-PB8M Tajimi connector) | ||||
| Compatible standard counters | C-500 / C-700 / CM-5B | ||||
| Accessories | Finger lever for lifting spindle ---> 1 pc | ||||
| Featuares | If Spindle inner spring is removed, measuring force will be that of spindle itself (only when in upright position) D-50 , D-50S ---> 1.0N D-100 , D-100S ---> 1.1N Recommended stand is PDS-2 | ||||
| Option | Level mounting clamp ( GB-50 )Customer must specify if application is up-side-down. The measuring force changes when the gauge is inverted. | ||||
 Dimensions (D-50 / D-50S / D-50HT) |
| Dimensions (D-100 / D-100S) |
所有評論僅代表網友意見，與本站立場無關。