產品介紹

產品名稱：塑膠抽粒

產品顏色：黑色（可根據需求定制各種顏色）

產品品牌：金塑顏

抽粒的優點：良好的分散性、顏色穩定、環保、操作方便等

金塑顏公司主要塑膠抽粒：

廣東金塑顏PMMA黑色母粒生產廠家文件夾專用亞克力色母粒批發

塑膠抽粒（造粒）的優點

1、顏色相當穩定，不會走色。
2、分散性很好，不會出現黑點，不會有混色現像。
3、更加環保，無灰塵，適合無塵車間使用
4、操作簡便可全自動化生產，節省人工成本。
5、可以做 特別實色 不透光產品。
6、可以改善塑料原有的劣性，加強塑膠的功能，達到想要的效果。

廣東金塑顏PMMA黑色母粒生產廠家文件夾專用亞克力色母粒批發

金塑顏的優勢

1. 品種齊全，大量現貨，出貨快，可定制。

2.專們成立了顏色凝難問題解決隊伍，針對性解決各種問題。

3. 各種機器生產設備齊全，生產快。

4. 免費打樣 1公斤起免郵為客戶嚴控每一分成本。

5. 產品都經第三方檢測認證的，可以達到各國環保標準。

6. 可上門技術支援，*的服務體系。

產品展示

廣東金塑顏PMMA黑色母粒生產廠家文件夾專用亞克力色母粒批發

造粒（抽粒）流程

1.塑膠顏色確定–塑膠攪拌–環保測試–塑膠性能測試–造粒成顆粒料–包裝成品
2.產品破碎－機器清洗－塑膠干燥–環保測試–塑膠性能測試–造粒機造粒成顆粒料

塑膠抽粒（造粒）的環保標準

1、環保標準（ROHS）
2、歐洲玩具標準（EN-71-3-1994）
3、澳大利亞（玩具）標準（)
4、法國塑料工業標準（FPL）
5、美國食品藥品管理局條例標準(FDA)
6、德國標準(BgVV)
7、歐洲塑料生產商協會標準(APME AP89/1)
8、美國CONEG和歐洲標準94/62 EC標準
9、美國UL防火標準
10、澳大利亞標準（食品接觸標準(1995)
11、日本聚烯烴協會的衛生標準(JHOSPA)
12、日本協會的衛生標準（JHPA）

廣東金塑顏PMMA黑色母粒生產廠家文件夾專用亞克力色母粒批發

關于金塑顏

東莞金塑顏塑膠科技有限公司是具有多年的 紅外線穿透塑膠，色母，色粉生產經驗，集科研、開發、生產、銷售為一體專業生產企業。其主要產品有，PC紅外線穿透塑膠，PMMA紅外線穿透塑膠，ABS紅外線穿透塑膠，GPPS紅外線穿透塑膠，紅外線色母，食品級顏料，化妝品顏料，高溫色粉，蠟燭色粉，水泥顏料，尼龍專用色粉，大紅色母，絕緣色母，黑色母，白色母，彩色母，通用色母，塑膠造粒生產，塑膠改性，訂制各種顏色塑膠抽粒，等等。
我們的 紅外線穿透塑膠，色母，色粉，以其高品質的性能和周全的售后服務，為廣大客戶所親睞。并擁有一支專業的技術和營銷服務隊伍，隨時隨地為您提供全面的產品和服務，歡迎廣大客戶來電來函，垂詢指導！

廣東金塑顏PMMA黑色母粒生產廠家文件夾專用亞克力色母粒批發

廣東金塑顏PMMA黑色母粒生產廠家文件夾專用亞克力色母粒批發

手機：（李先生）

電話： （黃小姐）

：

1：(色母粒）

2：（紅外線塑膠）

3：（顏料）

4：(塑膠抽粒）

郵箱1:ly@

備注：

How to judge the quality from the appearance of the black masterbatch?Good quality black masterbatch has moderate gloss and the oil is too bright, it means that the oil is put too much, and the luster is dim, which means the carrier is recycled material or excessive calcium is there a small pitted surface on the surface of the product after using the black masterbatch?If the pitted surface has small protruding tips, it means that the product processing equipment has limited ability to disperse the masterbatch, and the carbon black agglomerated particles in the masterbatch cannot be evenly sheared. A lower concentration black masterbatch should be used; or the masterbatch has too much carbonic acid Calcium and excessive white oil are extruded by single-screw and twin-screw machines under high pressure, forming small rigid blocks that cannot be the pitted surface is concave, it is caused by the volatilization of small molecules in the masterbatch, indicating that there is more white the black masterbatch containing calcium carbonate be used?Take a comprehensive , if the calcium carbonate in the black masterbatch has a fineness of 1000 mesh and the content is within 10%, it is a good choice for products that do not require outdoor appearance of the product has good gloss, the carbon black is evenly dispersed during processing, the blackness is not affected, and it has little effect on the strength of the the calcium carbonate fineness is less than 1000 mesh, the gloss may be dull, the surface is rough, and the strength of the product may the amount of 1000 mesh calcium carbonate exceeds 10%, the surface of the product will be dull and gray, the blackness will be insufficient, and the strength of the product will , it is not good to contain calcium carbonate in any products that require outdoor use, depending on the service life of the use this kind of black masterbatch, you need to be willing to use high-shear capacity Plastic Products' main business: functional black masterbatch_high gloss black masterbatch_black masterbatch, is a masterbatch choosing black masterbatch with high carbon black content reduce costs?The higher the carbon black content means the more difficult the dispersion, and the higher the requirements for the equipment's shearing capacity. It is necessary to equip a screw with a large length-to-diameter ratio, a mixing section, and abrasion resistance, which depends on the equipment with good mixing effect, use a masterbatch with a high carbon black concentration, and the corresponding amount of addition is small, which of course saves equipment with limited mixing capacity, the use of a masterbatch with a high concentration of carbon black will result in uneven dispersion and prominent pitting, resulting in a higher rate of rejects, and the gain is not worth the the production is abnormal when using a 40% carbon black masterbatch, but the effect is good after using 35%.High dispersion: black masterbatch is produced using carbon raw carbon black is dusty, light, and fluffy, unless large-scale treatment measures are adopted, it will make the working environment of this, casters generally choose black masterbatch to complete the pre-dispersion of carbon resin carrier is clean, free-flowing and easy to performance of carbon black that is difficult to disperse also troubles color masterbatch high-load black masterbatch produced by single or double screw extruder has very poor the end user mixes or molds these black masterbatch, its performance is only slightly better than carbon black, but the effect is also unsatisfactory.