巴可家庭影院投影機Balder巴德爾激光0.9寸DMD 5K 主動立體 預付定金

Specifications

Download full specs sheet

Projector typeSingle chip DLP

Technology0.9" DMD™

Resolution3,840 x 2,160 (4K UHD)

Aspect ratio1.78:1 (16:9)

Light sourceLaser phosphor

Light source lifetime20,000 - 60,000 hours
Laser intensity dependent

Light outputDCI (P3) Color Wheel: Up to 4,000 ANSI lumens
T Color Wheel: Up to 5,000 ANSI lumens
M Color Wheel: Up to 7,000 ANSI lumens

CLO (constant light output)Yes

Contrast ratio1,800:1 Sequential
450:1 ANSI

Brightness uniformity>90%

Lens range(R9802232) - EN68 (0.30:1) - Periscope Lens (requires vertical installation)
(R9801832) - FLDX UST (0.41:1) - 90° Lens
(R9802244) - EN67 (0.65:1)
(R9802243) - EN66 (0.80 - 1.21:1)
(R9802003) - EN76 (0.95 - 1.30:1)
(R9802242) - EN63 (1.20 - 1.70:1)
(R9802241) - EN61 (1.70 - 2.50:1)
(R9801211) - EN44 (2.50 - 4.60:1)

Optical lens shift

Up to 88% vertical lens shift & up to 38% horizontal lens shift (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Optical dowserYes

Color correctionP7 RealColor™

Color gamutDCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709

Image processingEmbedded Warp & Blend Engine

WARP4-Corner Warp & Bow Correction via Warp Engine

Orientation360° Rotation

Network connection10/100 Ethernet via RJ45 connection

Integrated web serverYes

Diagnosticsvia Prospector web interface

HDRHDR10

3DActive Stereoscopic 3D
Additional hardware required please contact an authorized Barco representative for details

Inputs1 x HDMI 2.0 (HDCP 2.2)
1 x HDBaseT (HDCP 1.4 - 9Gbps only)
2 x Dual Link DVI-D
2 x Display Port (1.2)
12G-SDI

1 x RJ45 Ethernet
1 x RS232
1 x Remote Control (RC)
3 x USB (2 x Rear, 1 x Front)
DMX (1 x Input, 1 x Output)

Input resolutionsFrom VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
or up to 2,560 x 1,600 @ 120Hz

LatencyTBD

ControlIR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant

NOTE: 12v Trigger(s) do not follow standard functionality and require an IP commａnd to enable / disable them.
Download our integration guide for more information.

Power requirements100 - 240V / 50 - 60Hz

Power consumption1,100 W - Max.

BTU per hour4,000 BTU/h - Max.

Standby powerStandby ECO Mode:
110v - 0.73W (with LAN Connection)
230v - 0.82W (with LAN Connection)