TCGB-21 type plastic film and thin sheet thickness tester is suitable for plastic film, thin sheet thickness test, but also suitable for paper, cardboard thickness test, foil, silicon, metal sheet thickness test, textile material thickness test, solid electrical insulation thickness test.

TCGB-21 Thickness Gauge for Plastic Film and Thin Sheet

1, the indexing value 0.001mm range 0-12mm

2. When the upper and lower measuring surface is convex/flat, the radius of curvature of the upper measuring surface is 15-50 (mm), and the load applied to the sample on the measuring face is between 0.1N and 0.5N.

3. Measurement accuracy

(1) Accuracy within 100um is 1um

(2) 100um to 250um accuracy 2um

(3) above 250um precision 3um

4. Overall dimension: 160x140x200mm

5. Weight: 1.5kg

1. Before the test, the dial meter is cleared to zero, and the joystick is moved several times to try to return to zero, and then the test is carried out. Lift and place gently during operation to avoid damage to the gauge and instrument.

2. Press the joystick with your finger to lift the measured foot, and place the measured object between the workbench and the measured foot. Gently place the joystick and the meter will read the thickness of the object being measured.

3. After use, put the instrument into a box and place it in a dry place to prevent moisture.