LR 240 Automatic Flash Point Tester

Intruduction

LR 240 Automatic Flash Point Tester is designed by rapid equilibrium closed cup method. It can rapidly test flash point of coating, paint (water-based paint), varnish, lacquer base, adhesive, solvent, Fatty acid methyl ester（FAME）, chemical reagent, flavor, spices, solid chemical products, viscous chemical products, , air fuel oil, petroleum and related products.

It conforms to ISO 3679，ISO 3680，ASTM D 3278，ASTM D3828 etc

Characters

◆ Can detect the flash point at a specific temperature between -35 ℃ and 105 ℃ （BGD 240/1）or RT to 105 ℃（BGD 240/2）at average rate heating.

◆ All functions are achieved through the membrane keypad and digital display.

◆ Users can select the built-in test procedures or set its own test parameters，also can modify the preinstall program to implement custom non-standard test.

◆ Built in two test procedures：rapid balanced mode and average rate heating mode

◆ Various parameters, such as the heating mode, time, temperature and the average rate heating can be set by the user themselves.

◆ Planning board action, the decline of the ignition, the detection of flash point is done automatically.

◆ A voice is prompted to user at each operation, at the end of the test there will be voice prompts, too.

◆ The gas ignition sources can be provided directly by the laboratory, you can also use the portable butane gas tank.

◆ Built-in cooling module is used to shorten the cooling time between the two tests.

Amend barometric pressure automatically

Main Technical Parameters

■ Flash Point Temperature Range：For BGD 240/1：-35℃ to 105℃；For BGD 240/2： RT to 300℃

■ Tested Flash Point Temperature Accuracy：0.5℃

■ Sample Volume：2ml

■ Heating Rate：Customize, quickest speed 5℃/min, longest duration 99min, highest temperature 100℃ （300℃）

■ Cooling Method：Built-in cooling module (without external cooler 0℃～100℃)

■ Output Interface：Computer RS232, printer (optional)

■ Size：400×220×170mm

■ Net Weight: 6 KG

■ Operate Temperature: 15℃～35℃

■ Power Supply：220/240V，50/60Hz

■ Come with Accessories：Steam source regulation component，Silicone tube，2ml injector，Thermometer 0～100℃，O-Type Seal Ring（5pcs）

■ Optional Accessories：Special injector for high viscosity（thick）sample，Powdery object injector 4ml injector，Stａnd oil of Flash Point （49.7℃）