1、裝備起因
紙管切割機假如呈現成績，那么切割出來的紙管就會呈現這些景象，包含每個工位的壓力、張力、速率等參數，切割機的刀具、紙管切割的長度等也會影響。假如是這些起因形成的不能闡明紙管有存在成績。
2、操縱起因
過細的操縱有能有效防止呈現如許的情形，當時檢討確認抉擇紙管、粘貼薄膜的伎倆等方面停止標準操縱，紙管的直線度、恰當增加紙管的壁厚等。也是不能疏忽的事項。
3、品質起因
當呈現品質成績的話，就須要剖析起因跟檢討了，比方織物在染缸內的折疊、擠壓、或許起落溫速率過快，應用紙質資料、膠水、增加劑等不達標、制造工藝不尺度等形成的紙管自身品質成績。

1, equipment reasons
If there is a problem with the paper pipe cutter, these phenomena will occur in the cut paper pipe, including the pressure, tension, speed and other parameters of each work position, the cutter of the cutter, and the length of the paper pipe cutting will also affect. If these causes are caused, it does not mean that there is a problem with the paper pipe.
2, operating reasons
Careful operation can effectively avoid such a situation, check in advance to confirm the selection of paper tubes, paste the film and other aspects of the standard operation, paper tube straightness, appropriate increase paper tube wall thickness. It is also a matter that can not be ignored.
3, quality reasons
When quality problems arise, it is necessary to analyze the reasons and check, such as the folding, squeezing, or excessive rate of temperature rise and cooling of the fabric in the dye tank. Paper tube quality problems caused by the use of paper materials, glue, additives, etc., which are not up to standard and the production process is not standard.