交流電流轉換器RA, RAN的產品介紹人：
RA-1 system Single phase, average sensing
RA-3 system Three phase, average sensing
RA-1T system Single phase, True rms sensing
RA-3T system Three phase, True rms sensing
These current transducers are available as average sensing devices calibrated in rms or as true rms units, either with a DC output proportional to the input.
This output signal enables several receivers to be operated simultaneously - such as indicators, recorders, alarm units etc. The input current can be connected via a C.T. or directly.
特性
? High accuracy ±0.2% R.O.
? Precision measurement even for distorted waves
? High immunity to external noise
? Wide selection of input and output range
? Quick and easy mounting
詳細規格
| Accuracy | ±0.2% R.O. (±0.1% R.O. Option) |
| Temp. coefficient | ≦100ppm/℃ |
≦60ppm/℃, 25℃±10℃ | |
| Temp. range | －20℃ to 60℃, Operating 0～50℃ |
| Humidity range | Up to 95% RH |
| Isolation | Input/output/power/case |
| Dielectric test | DIN-IEC 688 |
2K Vrms/1min Between terminal to terminal | |
2.8K Vrms/1min,Between terminal to case | |
| Surge test | DIN-IEC 255-4,ANSI C37 |
90a/1974 5KV (1.2×50us) | |
| Insulation resistance | 100MΩ or more, DC 500V |
| Housing material | ABS Resin (94V-0) |
| Mounting Rail | 35mm |
| Aux. power | AC 115/230V±15%, 50/60Hz, 3VA |
DC 24V, 48V, 110V±20% (option) | |
所有評論僅代表網友意見，與本站立場無關。