溫馨提示您:
塑膠原料行情每天每時波動較大無法及時更新，個別貨物可能存在新舊包裝，請親們理解！產品信息和近期價格請您及時來電！
電話：鄧女士，葉經理
Product TextsRubber modified (PC SAN) blend10 % glass fiber filledinjection molding gradeoptimized heat ageing- and UV-stabilityvery good flowtensile modulus = 4800 MPahigh heat resistanceVicat/B 120 = 134 °C.
| 機械性能(機械性能(Mechanical properties)) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) |
| ISO數據(ISO數據(CAMPUS/ISO) Data) |
|
|
|
| 拉伸模量(Tensile Modulus) | 4800 | MPa | ISO 527-1/-2 |
| 破壞時應變(Stress at break) | 95 | MPa | ISO 527-1/-2 |
| 破壞時應變(Strain at break) | | % | ISO 527-1/-2 |
| 熱性能(熱性能(Thermal properties)) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) |
| ISO數據(ISO數據(CAMPUS/ISO) Data) |
|
|
|
| 溫度負荷變形(Temp. of deflection under load) ( MPa) | 121 | °C | ISO 75-1/-2 |
| 溫度負荷變形(Temp. of deflection under load) ( MPa) | 133 | °C | ISO 75-1/-2 |
| 維卡軟化溫度（50℃/ h的50N）Vicat softening temperature | 132 | °C | ISO 306 |
| COEFF線性熱(Coeff. of linear therm. expansion) (parallel) | 40 | E-6/K | ISO 11359-1/-2 |
| COEFF線性熱(Coeff. of linear therm. expansion) (normal) | 67 | E-6/K | ISO 11359-1/-2 |
| 厚度測試(Thickness tested) | | mm | IEC 60695-11-10 |
| 燃燒性(球壓痕硬度(Burning behav)). at thickness h | HB | class | IEC 60695-11-10 |
| 厚度測試(Thickness tested) | | mm | IEC 60695-11-10 |
| UL 識別(recognition) | UL | - | - |
| 電氣性能(Electrical properties) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) |
| ISO數據(ISO數據(CAMPUS/ISO) Data) |
|
|
|
| 相對介電常數(Relative permittivity) (100Hz) | | - | IEC 60250 |
| 相對介電常數(Relative permittivity) (1MHz) | 3 | - | IEC 60250 |
| 耗散因數(耗散因數(Dissipation factor)) (100Hz) | 25 | E-4 | IEC 60250 |
| 耗散因數(耗散因數(Dissipation factor)) (1MHz) | 90 | E-4 | IEC 60250 |
| 體積電阻率(Volume resistivity) | 1E13 | Ohm*m | IEC 60093 |
| 表面電阻率(Surface resistivity) | 1E15 | Ohm | IEC 60093 |
| 電氣強度(Electric strength) | 35 | kV/mm | IEC 60243-1 |
| 相比漏電起痕指數(Comparative tracking index) | 200 | - | IEC 60112 |
| 其他屬性(Other properties) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) |
| ISO數據(ISO數據(CAMPUS/ISO) Data) |
|
|
|
| 吸水率(Water absorption) | | % | Sim. to ISO 62 |
| 吸濕性(Humidity absorption) | | % | Sim. to ISO 62 |
| 密度(Density) | 1220 | kg/m3 | ISO 1183 |
| 流變計算屬性(Rheological calculation properties) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) |
| ISO數據(ISO數據(CAMPUS/ISO) Data) |
|
|
|
| 密度(Density) of melt | 1050 | kg/m3 | - |
| 熔體熱導率(Thermal conductivity of melt) | 07 | W/(m K) | - |
| 規格的熱容融化(Spec. heat capacity of melt) | 1900 | J/(kg K) | - |
| Eff. thermal diffusivity | | m2/s | - |
| 噴射溫度(Ejection temperature) | 130 | °C | - |
| Test specimen production | 值(Value) | 單位(Unit) | 測試標準(Test Standard) |
| ISO數據(ISO數據(CAMPUS/ISO) Data) |
|
|
|
| Injection Molding, melt temperature | 260 | °C | ISO 294 |
| Injection Molding, mold temperature | 80 | °C | ISO 10724 |
| Injection Molding, injection velocity | 240 | mm/s | ISO 294 |
Diagrams Water content: %
所有評論僅代表網友意見，與本站立場無關。