INTELLIGENT

ELECTRO-HYDRAULIC ACTUATOR

智能型電液聯動執行器

●穩定寬泛的扭矩選擇可達60萬N.m

●Exd IB/CT4防爆和IP67防護

●IEC61808- 22010認證的SIL2和SIL3的功能安全等級

●Stable and wide selection of torque can reach 600.000N.m

●Explosion-proof Exd IIB/CT4 and minimun protection proof IP67

●Function safety grade SIL2 and SIL3 certistied by IEC61508-22010

Intelligent Elcetro-Hydraulic Actuators

電液聯動/電液執行機構

Control

數碼界面顯示

Interface display

數碼界面能在50°C的環境下操作多語言的設定、狀態和診斷顯示背光技術能提供的對比度。

The multi-language setting, status and diagnostice can be operated and displayed on the interface under-50C;Backlighting technology can be visible.

多選擇的控制

Multiple control choice

執行器可以選擇遠程數字量、模擬量或Fieldbus Modbus及Hart等總線進行遠程控制。可以選配就地手動泵操作。或者藍牙、紅外線連接控制器設定。以及通過面板按鈕直接設定操作。

Remote 10 module, remote analog. Fieldbus Modbus and Hart etc are available for control choice; It can be operated and programmed by the connecting of cortroller with bluetooth and ifrared, or operated directly via panel button; Manual pump is optional for operation choice.

系統監測

System Monitoring

配置壓力傳感器以監測內部產生的液壓。以保證在壓力下降至要求水平時，啟動電機/泵來保持內部液壓。配置溫度傳感器監測油溫和環境溫度。

System monitoring with a pressure sensor to monitor the intermal oil pressure.The motor or pump will start to keep the stability of intermal oil pressure once the pressure is down to the setted pressure; With a temperature sensor to monitor the temperature of oil and environment.

閥位

Valve position

配置一個非接觸式光電編碼器，用于長期監測執行器的位置，4 20mA信號輸出，并配置套閥位極限信號安全開關。

Valve position with a non-contact hall efet sensor to monitor actuator position for a long period. That is output 4-20mA signal; It is also equipped one set of limit signal safety switch of valve position.

電源

Power supply

內部標配了一個超級電容，當主電源失效時，配置和數據記錄參數儲存在記憶芯片中，數據最長可保持兩周時間。數據記錄器有能力監測執行器運行到失電安全位置的動作。

Super capacitor is the standard configuration.The data logging parameters will be saved in the memory chip up to two weeks when the main power fails; The data logger is able to detect the action of the actuator running to a safe location of the power Off.

工程能力

Engineering capabiity

該電液聯動擁有十多年的制造經驗，產品品質不斷提升,團隊更加專注、專業!

在快速成型過程中的校驗過程中，不斷刪除系統中不確定的錯誤因素，使產品性能更加穩定，

With more than 10yeurs of expenience in valves and sctutors JDP is more prfessonal than before.

樣機經過多次振動試驗和沖擊試驗，不斷優化產品設計結構,延長產品使用壽命。

After calbations, we have deletes the uncertain errors in the system and it is more stable.

With Impact test and vibration test for many times, we optimize the product design structure ａnd extend the service life of products.

成品后，還原最初的操作條件，觀察各零部件間的相互作用，通過各部件間的摩擦因數的大小(磨損程度)，采用高性能材料，同時優化產品結構，以達到增加產品壽命的目的。

Afer the finished product, the initial operating conditions are restored. the interaction between components is observed, and the high performance materials are adopted through the fiction coficient (wear degree) between components, and the product structure is optimized to enlarge product life.

緊急狀態設置

Emergeney setting

可以設定在外部斷電等緊急情況時，執行器自動驅動閥門至關閉、打開或者保持狀態可選。

Actuator can drive the valve to on/off or keping status for option when main power is on emergency off situation.

自診斷和故障報警

Self-diagnosis and trouble alarm

閥位設定后如發生位移，系統自動補償至設定位置并報警，系統設定參數會自動報警。故障位可以記錄和查看。

System will automatically compensates to setted position and alamm If the valve position shifted after stting; It will alarm auoaticaly once the located parameters exceeds the limitation.

智能型電液聯動執行器選型

Inelligent Electro Hydraulic Actuator Lectotype

EH—RT/ZT—S/D—開關型/調節型—XX力矩—220V/380V AV—手動機構YES/NO—防爆/防水

智能型電液聯動執行器選型表( Lectotype Table)

注Note:

1表中時間為油壓方向時間。彈簧方向時間0.5~10秒。可以根據客戶特殊要求設定。

2.寬泛的扭矩選擇可以根據客戶具體要求設定。

3.面板按鈕的就地控制和非侵入式藍牙控制讓操作更方便。

4. 4-20mA或1-5V模擬量，接受Fieldbus Modbus及Hart等總線進行遠程控制。

5.防爆等級ExdlIBT4.防水等級IP67.

6.使用環境，常溫型-20~70C，低溫型-40-60C。

7.失電安全選擇: FO:故障開   FC: 故障關   FL: 故障保位

1. The time in the table is the oil pressure diretion. The spring diretion time is 0.5-108, it is available

to program upon the request.

2. The widely range of torque can be customized acording to demand.

3.The local and nonm-invasive control of pane button makes the operation casier.

4.4-20mA or 1-5V Analog quntytccepte the bus remote control of Fielbus Modbus and Hart.

5. Anti-Explosion egrade: ExIBT4; WaterproofLevel IP67.

6. Working Envionment: Stundard Temperature: -20C-70C ; Low Tempernture: 40°C -60°C

7. Safety Selection of power loss FO: FailOn   FC: FailClose   FL: Fail Lock

尺寸參考表（Dimension reference table）

注:以上數據僅供參考,最終以雙方確認圖紙為準。

Note: Data for reference only, the final object with customer confirmation.

EHA-ZT立式Vertical Type

注:推力、行程、安裝方式根據客戶具體要求設定，最終以雙方確認圖紙為準。

Note: Thrust, Stroke and installation can be programmed upon request, the final object with customer confirmation.

EHA-ZT臥式Horizontal Type

注:推力、行程、安裝方式根據客戶具體要求設定，最終以雙方確認圖紙為準。

Note: Thrust, Stroke and installation can be programmed upon request, the final object with customer confirmation.