WHATMAN POLYCAP AS囊式濾器的詳細介紹WHATMAN POLYCAP AS囊式濾器6705-3602 6705-3604 6705-3610 
6708-3602 6708-3604 6709-3602 
Polycap? AS (Aqueous Solution) is a unique product recommended for filtering 
aqueous solutions. It combines a glass microfiber (GMF) prefilter and a nylon 
membrane, prolonging the life of the filter and allowing larger volumes and 
difficult samples to be filtered easily.
Features and benefits 
  First layer (GMF) acts as a prefilter to ensure longer membrane (0.2, 0.45 and 
  1.0 μm) life and higher filtration efficiency
  Nylon membrane layer is inherently hydrophilic, has low extractables, is 
  biosafe and has excellent flow rates
  Ultra-clean containing no surfactant or mold release agents
  Housing thermally fused (no glues, adhesives or extraneous materials)
  Integrity-testable by bubble point, pressure decay or forward flow methods
  Provides highly effective filtration area in a small size
  Autoclavable; some presterilized with gamma irradiation
  Manufactured in clean room facilities under ISO Quality Systems

Applications 
  Admixtures
  Biologicals
  Buffers
  Cleaning/rinsing solutions
  Enzymes
  Extemporaneous solutions
  Immunologicals
  Irrigation solutions
  Nutrients
  Ophthalmic solutions
  Pharmaceutical solutions
  Reagent preparation
  Salt solutions
  Therapy solutions
  Tissue culture media
  Viral suspensions
 
      Technical Properties - Polycap AS
      HousingPolypropylene
      VentOn inlet
      PrefilterGlass microfiber double laminated with polyolefin monofilament 
      non-woven
      MembraneNylon
      Support systemPolypropylene
      SealingHeat-fused
      Maximum pressure4.1 bar (60 psi)
      Endotoxin levelL LAL tested, ≤ 0.5 EU/ml
      BiosafetyMaterials pass USP Class VI
      SterilizationCertain filter devices have been sterilized.
      Capsules may be autoclaved at 121°C for 20 minutes (maximum 132°C). 
      However, an integrity test should be performed after autoclaving. Filling 
      bell is not autoaclavable but is detachable (sterile and nonsterile 
      options offered)
      Filtration area36 mm capsule: 400 cm2 (62 in2)
      75 mm capsule: 820 cm2 (127 in2)
      150 mm capsule: 1650 cm2 (256 in2)
      IPA bubble point 0.2 μm membrane: >  1.1 bar (16 psi)
      0.45 μm membrane: > 0.69 bar (10 psi)
      1.0 μm membrane: >  0.14 bar (3 psi)
      SSB - Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
      1/2 SB - Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing
      MNPT - Male national pipe thread
      FNPT - Female national pipe thread
      HB - Hose barb

      Ordering Information - Polycap AS
      Catalog NumberDescription
      6708-3602Polycap AS 36, sterile, 0.2 μm, with 1/2 SB inlet and outlet, 
1/pk
      6705-3602Polycap AS 36, sterile, 0.2 μm, with SB inlet and outlet, 1/pk
      6709-3602Polycap AS 36, sterile, 0.2 μm, with MNPT inlet and SB outlet, 
      1/pk
      2606TPolycap AS 36, 0.2 μm, FNPT inlet and outlet, 5/pk
      2606NSPolycap AS 36, 0.2 μm, with SB inlet and outlet, 5/pk
      6708-3604Polycap AS 36, sterile, 0.45 μm, with 1/2 SB inlet and outlet, 
      1/pk
      6705-3604Polycap AS 36, sterile, 0.45 μm, with SB inlet and outlet, 1/pk
      2607NSPolycap AS 36, 0.45 μm, with SB inlet and outlet, 5/pk
      6705-3610Polycap AS 36, sterile, 1.0 μm, with SB inlet and outlet, 1/pk
      2608NSPolycap AS 36, 1.0 μm, with SB inlet and outlet, 5/pk
      6706-3602Polycap AS 36, sterile, 0.2 μm, with SB inlet and outlet plus 
      filling bell, 1/pk
      6709-7502Polycap AS 75, sterile, 0.2 μm with MNPT inlet and SB outlet, 
1/pk
      6708-7502Polycap AS 75, sterile, 0.2 μm with 1/2 SB inlet and outlet, 1/pk
      6705-7502Polycap AS 75, sterile, 0.2 μm, with SB inlet and outlet, 1/pk
      2706TPolycap AS 75, 0.2 μm, with FNPT inlet and outlet, 5/pk
      6705-7504Polycap AS 75, sterile, 0.45 μm, with SB inlet and outlet, 1/pk
      6708-7504Polycap AS 75, sterile, 0.45 μm, with 1/2 SB inlet and outlet, 
      1/pk
      6709-7504Polycap AS 75, sterile, 0.2 μm, with MNPT inlet and SB outlet, 
      1/pk
      2707NSPolycap AS 75, 0.45 μm, with SB inlet and outlet, 5/pk
      6705-7510Polycap AS 75, sterile, 1.0 μm, with 1/2 SB inlet and outlet, 
1/pk
      6706-7502Polycap AS 75, sterile, 0.2 μm, with SB inlet and outlet plus 
      filling bell, 1/pk
      2806TPolycap AS 150, 0.2 μm, with FNPT inlet and outlet 5/pk
      2806Polycap AS 150, sterile, 0.2 μm, with 1/2 HB inlet and outlet, 5/pk
      2805Polycap AS 150, sterile, 0.2 μm, with 1 11/2 sanitary inlet and 
      outlet, 5/pk
      2807Polycap AS 150, sterile, 0.45 μm, with 1/2 SB inlet and 1/2 HB outlet, 
      5/pk

GE Whatman濾紙濾膜產品一級代 理(一),其余目錄見下方

            WHATMAN離心超濾管 
            WHATMAN提取套管圓筒濾紙萃取套管 
            whatman 微生物檢測系統 
            WHATMAN擦鏡紙 
            WHATMAN盤式濾器 
            WHATMAN囊式濾器 
            WHATMAN針頭濾器 
            whatman定性濾紙 
            whatman定量濾紙 
            whatman玻璃纖維濾紙GF/A GF/B GF/C GF/D GF/F 
            whatman聚碳酸酯膜 
            whatman無機膜 
            whatman膜容器過濾器 
            whatman煙草檢測濾紙劍橋濾片 
            whatman PH試紙 
            DE-52纖維素 
            Whatman醋酸纖維素膜硝酸纖維素膜混酯膜再生纖維素膜