訂貨號

名稱

描述

釜體單層結構無底閥( 無內襯)

5810050

NR-10L

反應釜套裝

SS

NR-10L Set of basic reactor made of SS 316TI , volume 11,4L for usage without PTFE-lining.Includes reactor vessel with lid made of SS 316TI, O-seal ring (FPM,217x5,0mm), manual quick-lock closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve,nominal width 4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection) as well as two 8mm swagelok connections.

釜體單層結構帶底閥( 無內襯)

5810055

NR-10L

反應釜套裝

SS BV

NR-10L Set of basic reactor made of SS 316TI , volume 11,4L for usage with bottom drain valve.Includes reactor vessel with lid made of SS 316TI, O-seal ring (FPM,217x5,0mm), manual quick-lock closure ring, standard fittings

( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve, nominal width 4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection), bottom drain valve as well as two 8mm swagelok connections.

釜體夾套結構無底閥( 可以帶內襯)

5810060

NR-10L

Reactor Set

SS J

NR-10L Set of basic reactor made of SS 316TI with jacket, volume 11,4mL for usage with or without PTFE-lining.Includes reactor vessel with welded-on and isolated jacket for heating/cooling with circulation heater/cooler, lid made of SS 316TI, O-seal ring (FPM, 217x5,0mm), manual quick-lock closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve, nominal width 4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection) as well as two 8mm swagelok connections

釜體夾套結構帶底閥( 無內襯)

5810065

NR-10L

反應釜套裝

SS J BV

NR-10L Set of basic reactor made of SS 316TI with jacket, volume 11,4L for usage with bottom drain valve.Includes reactor vessel with welded-on and isolated jacket for heating/cooling with circulation heater/cooler, lid made of SS 316TI, O-seal ring (FPM, 217x5,0mm), manual quick-lock closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve, nominal width4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection), bottom drain valve as well as two 8mm swagelok connections.

其他可選配件、備用件

閥門

不同材質的底部排水閥及氧氣閥門可選

壓力測量

多型號壓力表和壓力傳感器可選

加熱/ 冷卻盤管

不銹鋼材質，另有帶PTFE涂層的盤管可選

磁耦合傳動軸堵頭

不銹鋼材質和帶PTFE涂層的不銹鋼堵頭可選

通用附件

高壓管路、泄壓閥、氧氣閥門、液體進樣、

加熱攪拌單元

多型號頂置式攪拌、攪拌槳、溫度控制器、加熱套、恒溫夾套、熱電偶傳感器可選

攪拌單元安裝附件

彈性聯(lián)軸器、電機固定架、磁耦合傳動軸等附件可選

升降支架

Lift System

For a functioning configuration one lid fixation and one reactor fixation are needed beside the basic lift system.多型號整體升降支架可選，

O 型圈

O-Ring 143x4,0mm，多材質可選

CR5701000

Reflux Condenser

Reflux Condenser for NR-10L DN50 600mm

CR5701001

Cooling Fin

Cooling Fin 600mm