
上海今森單根電線電纜垂直燃燒試驗儀KS-54B是依據GB/T18380.11-2008、GB/T18380.12-2008、GB/T18380.21-2008、GB/T18380.22-2008、 IEC60332-1 、 GB/T5169.14-2007 等標準規定的模擬單根電線電纜燃燒性能安全試驗項目。
Shanghai insment single cable vertical burning tester KS-54B is based on the simulation of single wire and cable, GB/T18380.12-2008, GB/T18380.21-2008, GB/T18380.11-2008, GB/T18380.22-2008, IEC60332-1, GB/T5169.14-2007 and other standards of the combustion performance of safety test items.
上海今森單根電線電纜垂直燃燒試驗儀KS-54B是冷板加高檔噴涂外箱;采用目前的PLC控制,做到全智能化控制方式,真正實現網絡化及遠程控制;有TFT真彩色液晶可選配;可做到客戶的人性化操作界面的升級,真正達到比對結果。 標準規定的模擬單根電線電纜燃燒性能安全試驗項目。
Shanghai insment single cable vertical burning tester KS-54B is cold plate with high-grade paint box; adopting advanced PLC control, to achieve full inligent control mode, realize the network and the remote control; TFT true color LCD optional; can be user-friendly interface client upgrade, achieve international comparison results. Standard Specification for simulation of single wire and cable performance test.
主要針對導體直徑大于8mm(截面積大于0.5mm2)或小于8mm(截面積小于0.5mm2)的單根電線電纜的可燃性能進行評定。適用于照明設備、低壓電器、家用電器、機床電器、電機、電動工具、電子儀器、電工儀表、電氣連接件和輔件等電工電子產品及其組件部件的研究、生產和質檢部門。
Shanghai insment single cable vertical burning tester KS-54B mainly for conductor diameter greater than 8mm (cross-sectional area greater than 0.5mm2 or less than 8mm) (cross-sectional area less than 0.5mm2) Combustible Properties of single cable were evaluated. Suitable for lighting equipment, low-voltage electrical appliances, household appliances, electrical tools, electric motor, electric tools, electronic instruments, electrical instruments, electrical connectors and accessories such as electrical and electronic products and components of the research, production and quality inspection department.
控制方式 | 采用目前的PLC控制,做到全智能化控制方式 |
顯示方式 | 真彩色液晶顯示(標配7寸威綸16:9觸摸屏),可做到客戶的人性化操作界面的升級 |
數據輸出 | 測試結束時,設備自動判定合格與不合格 |
生成測試報告測試報告打印 | |
上位機軟件 | 實現測試報告的自動編號、存儲和打印 |
燃燒器 | 內徑Φ12mm ± 0.5mm(符合GB/T18380.11)及內徑Φ9.5mm ± 0.5mm(符合GB/T18380.21)本生燈各一個 |
火焰高度 | 20mm ± 2mm 到190mm±1mm可調 |
燃燒氣體 | 95% 丙烷氣( 一般情況可采用液化石油氣代替 ) |
流量壓力 | 帶雙流量表及壓力表(燃氣及空氣) |
火焰溫度要求 | 從100℃±5℃升到700℃±3℃的時間在45秒±5秒之內 |
試驗傾角 | 45° |
熱電偶 | Φ0.5mm進口鎧裝熱電偶(K型),溫度測試范圍為0~1000℃ |
施焰時間 | 0-999.9s±0.1s可調 |
持焰時間 | 0-999.9s±0.1s,自動記錄,手動暫停 |
工作室尺寸 | 300x450`x1200mm(0.16立方),不帶工作室門 |
設備外尺寸 | 700mm寬×450mm深×1400mm高 |



所有評論僅代表網友意見,與本站立場無關。