General purpose solar panel product features:

(1) Light transmittance: the light transmittance of PC sunlight plate can reach about 85%, which can be beautiful with glass. UV coated panels are not easy to produce yellowing, atomization and poor light transmission when exposed to sunlight. The light transmission loss is about 10%, the PVC loss rate is about 15-20%, and the glass fiber loss rate is about 12-20%.

(2) Impact resistance: the impact strength is about 250-300 times that of ordinary glass, about 30 times that of acrylic plate with the same thickness, and about 2-20 times that of tempered glass. It has the reputation of "unbreakable glass" and "sound steel".

(3) Anti ultraviolet and external line: one side of PC board is coextruded with anti ultraviolet and external line (UV) coating, and the other side is treated with anti condensation, which integrates the functions of anti ultraviolet and external line, heat insulation and fog drop prevention. It can prevent the purple line from passing through, and is suitable for protecting valuable works of art and exhibits from being damaged by the purple line.

(4) Light weight: the proportion is about half of that of glass, saving the cost of transportation, removal, installation and support frame.

(5) Flame retardant: it is confirmed in the standard gb50222-95 that P C solar panels are flame retardant, i.e. Class B1. The ignition point of PC board is about 580 ℃, and it will self extinguish after leaving the fire. No * gas will be generated during combustion, which will not contribute to the spread of the fire.

(6) Bendability: the cold bending method can be adopted on the construction site according to the design drawing, and the arch, semi-circular roof and window can be installed. The bending radius is about 175 times of the thickness of the plate, and it can also be hot bent.

(7) Sound insulation: the sound insulation effect of PC solar panel is obvious, and it has sound insulation compared with glass and subassemblies of the same thickness. Under the condition of the same thickness, the sound insulation loss of PC solar panel is about 5-9db higher than that of glass. It is the material of choice for highway noise barrier.

(8) Energy saving: it is cool in summer and insulated in winter. The thermal conductivity (k value) of PC solar panel is lower than that of ordinary glass and other plastics. The thermal insulation effect is about 7-25% higher than that of the same glass, and the thermal insulation of PC solar panel is about 49%. Thus, the heat loss is greatly reduced, which is used in buildings with heating equipment.

(9) Temperature adaptability: PC board is not prone to cold embrittlement at -40 ℃ and does not change at 125 ℃. Its mechanical and mechanical properties do not change significantly in harsh environment.

(10) Weather resistance: the PC solar panel can maintain the stability of various physical indexes in the range of - 40 ℃ to 120 ℃. After 4000 hours of artificial climate aging test, the yellowing degree is 2, and the reduction value of light transmittance is about 0.6%.

(11) Anti condensation: the outdoor temperature is 0 ℃, the indoor temperature is 23 ℃, the indoor relative humidity is less than 80%, and the inner surface of the material is free of condensation. Dew will flow away along the surface of the plate and will not drip.

Storage and transportation of PC endurance board:

1. It shall be properly packed during transportation and storage, and shall not be stored in places exposed to direct sunlight or rain;

2. The plate is covered with a protective film. During handling and installation, the side containing the UV protective layer should be facing the sun. Do not remove the protective film before installation

3. During transportation, paper sheets shall be placed under the plates to prevent scratching the plate surface. When getting on and off the vehicle, they shall be handled with care and shall not be dropped directly. 4. PC plates shall be stored indoors and shall be dry, well ventilated, clean and dust-free, and shall not be in direct contact with the cement floor to avoid corrosion of the plates

5. It is strictly prohibited to mix with solvent with *.

Precautions for storage, transportation and use of PC endurance board: · it is forbidden to contact with wet cement surface and acid and alkaline material surface. Do not contact with solvent, glue and paint. The frame shall be clean and the surface of the caulking groove shall be flat. Generally, dust and dirt on the surface of PC board shall be wiped with soft cloth or sponge dipped with neutral detergent, and then washed with clean water. Select the correct sheet thickness and allowable radius of curvature.

Yongxin PC structural plate category: general-purpose endurance plate (single-layer plate), single (double) surface UV endurance plate, PC particle plate, PC sanding plate, sound barrier transparent sound insulation plate, PC anti-wear scratch plate, PC wave tile, general-purpose sunlight plate (multi-layer plate), single (double) surface UV sunlight plate, crystal plate, anti dew sunlight plate, easy clean sunlight plate, anti dew + easy clean sunlight plate, sunlight plate, PC double-layer sunlight plate, PC honeycomb sunlight plate, PC four-layer sunlight plate PC engineering sunshine board, PC engineering endurance board.