PC-H型連接件,采用聚碳酸酯PC原料生產,主要用于板材間連接,起到穩固板材防止接縫滲漏水的作用的PC異型材,是一種新型的陽光板壓條,形似“工”“H”字型,也稱PC工字壓條,PC-H型連接件,產品兩邊卡口可插接陽光板,在產品中間兩道直立立體筋之間用螺絲固定,即可以避免螺孔滲水現象也可減少安裝螺絲時對板材邊緣造成的損傷,使用簡單便捷,與陽光板同質化的PC原料膨脹系數相同,不易出現氣候原因造成的縫隙。不同厚度陽光板可選擇適用的PC型材。
常規材質:PC
常用規格:6m/支
常用陽光板厚度: 4mm―10mm陽光板及耐力板大型項目工程配件
Pc-h type connector is made of polycarbonate PC raw materials. It is mainly used for connecting between plates. It plays a role in stabilizing plates and preventing joint leakage. It is a new type of sunlight plate batten, similar to "I" and "H" shape, also known as PC I-shaped batten. Pc-h type connector. The bayonets on both sides of the product can be inserted into the sunlight plate, and the two vertical three-dimensional ribs in the middle of the product are fixed with screws, It can not only avoid the phenomenon of water seepage in the screw hole, but also reduce the damage to the edge of the plate when installing screws. It is simple and convenient to use. It has the same expansion coefficient as the homogenized PC raw material of the sunlight plate, and is not easy to have cracks caused by climate. Suitable PC profiles can be selected for sunlight panels with different thicknesses.
General material: PC
Common specification: 6m/ piece
Thickness of common sunlight plate: 4mm-10mm sunlight plate and endurance plate large project engineering accessories










所有評論僅代表網友意見,與本站立場無關。