PC上下扣鋁壓條：采用PC原料，是式樣與作用同鋁合金上下扣壓條一樣的PC型材，主要作用在骨架上陽光板板材間接縫處的固定。此產品分上下不同造型PC型材，是通過內置兩條立體向上的鋸齒卡扣把陽光板牢牢鎖緊合一的陽光板壓條，下邊主要用于固定，螺絲鎖定在兩道直立向上的卡扣之間，再扣上弧形的上蓋，掩蓋了螺絲的安裝點，表面透明美觀。產品本身與陽光板用同質化的原料,所以氣候引起的熱膨冷縮的伸縮性較為穩定，與PC板材有一樣的透明度使工程效果整體更有美觀性。

常規材質：鋁 PC

常用規格：6m/支

常用陽光板厚度： 6mm―10mm陽光板及耐力板大型項目工程配件

PC upper and lower buckle aluminum strip: PC material is used. It is a PC profile with the same style and function as the aluminum alloy upper and lower buckle strip. It is mainly used to fix the indirect seam of the sunlight plate on the skeleton. This product is divided into PC profiles with different shapes from top to bottom. It is a sunlight plate batten that firmly locks the sunlight plate into one through the built-in two three-dimensional upward serrated buckles. The lower side is mainly used for fixing. The screws are locked between the two vertical upward buckles, and then the arc-shaped upper cover is buckled to cover the screw installation point. The surface is transparent and beautiful. The product itself and the sunlight board are made of homogeneous raw materials, so the thermal expansion and cold contraction caused by the climate are more stable, and the transparency is the same as that of the PC board, making the overall engineering effect more beautiful.

Conventional material: Aluminum PC

Common specification: 6m/ piece

Thickness of common sunlight plate: 6mm-10mm sunlight plate and endurance plate large project engineering accessories